MTP Female to 4 LC UPC Duplex 8 Fibers OM3 50/125 Multimode Harness
Cable MTP≤0.35dB, LC≤0.3dB
MTP/MPO hybrid transitions are terminated with MTP/MPO connector on
one end & Standard LC, FC, SC, ST, MTRJ, MU connectors on other
end to meet a variety of fiber cabling requirements. Such patch
cords are widely used to interconnect with the current installed
base of transmitters, receivers and patch panels.
Direct Connection for 40GBASE-SR4 QSFP+ Optics to 4x 10GBASE-LR
SFP+ Optics with MTP Harness Cable
How to breakout 40G link into 4x 10G for going to different
purpose? A type-B female MPO/MTP-4x LC harness cable is required.
The following shows the 4x 10GBASE-LR SFP+ transceivers
interconnection with 1x 40GBASE-LR QSFP+ transceivers by one
MTP-4LC harness cable directly.
|1||11552||Cisco SFP-10G-SR Compatible 10GBASE-SR SFP+ 850nm 300m DOM
|2||39700||One-Click Cleaner for MTP/MPO Connector|
|3||41505||1m (3ft) MTP Female to 4 LC UPC Duplex 8 Fibers OM4 Harness Cable,
|4||26388||Fiber Optic Cassette Cleaner for LC/MU/SC/FC/ST/MPO/MTRJ Connector|
|5||17931||Generic Compatible 40GBASE-SR4 QSFP+ 850nm 150m MTP/MPO Transceiver
|6||29123||S5850-48S6Q (48*10GE+6*40GE) High Performance Data Center Switch|
Lower Insertion Loss & Higher Performance
- High-quality cable with 3D interferometer tested MTP connector
- Elite MTP connector ensures stable signal transmission.
- Specified colored magenta for instant identification as an OM4
Quality Connectors for High-Density Fiber Patching
Low Insertion Loss LC Connector
The tightly tolerance ceramic ferrules ensuring consistent low
8 Fiber Counts Used
1-plug x 1-row applications, 4 Fibers used in each end, requiring
lateral signal transposition.