3.0mm Jacket 8 Fibers MTP Female to 4 LC UPC Duplex OS2 9/125
Single Mode Harness Cable
|Connector A||MTP Female (pinless)||Connector B||LC UPC Duplex|
|Fiber Mode||OS2 SMF 9/125μm||Wavelength||1310/1550nm|
|Insertion Loss||MTP≤0.35dB, LC≤0.3dB||Return Loss||MTP≥60dB, LC≥50dB|
|Jacket OD||3.0mm||Fan-Out Diameter||2.0mm|
|Installation Tensile Load||100 N||Long-Term Tensile Load||50 N|
|Storage Temperature||-40°C to +85°C||Operating Temperature||-10°C to +70°C|
|Cable Jacket||LSZH||Fiber Count||8 Fibers|
Direct Connection for 40GBASE-SR4 QSFP+ Optics to 4x 10GBASE-LR
SFP+ Optics with MTP Harness Cable
How to breakout 40G link into 4x 10G for going to different
purpose? A type-B female MPO/MTP-4x LC harness cable is required.
The following shows the 4x 10GBASE-LR SFP+ transceivers
interconnection with 1x 40GBASE-LR QSFP+ transceivers by one
MTP-4LC harness cable directly.
|1||11552||Cisco SFP-10G-SR Compatible 10GBASE-SR SFP+ 850nm 300m DOM
|2||39700||One-Click Cleaner for MTP/MPO Connector|
|3||41505||1m (3ft) MTP Female to 4 LC UPC Duplex 8 Fibers OM4 Harness Cable,
|4||26388||Fiber Optic Cassette Cleaner for LC/MU/SC/FC/ST/MPO/MTRJ Connector|
|5||17931||Generic Compatible 40GBASE-SR4 QSFP+ 850nm 150m MTP/MPO Transceiver
|6||29123||S5850-48S6Q (48*10GE+6*40GE) High Performance Data Center Switch|
Lower Insertion Loss & Higher Performance
- High-quality cable with 3D interferometer tested MTP connector
- Elite MTP connector ensures stable signal transmission.
- Specified colored magenta for instant identification as an OM4
Quality Connectors for High-Density Fiber Patching
Low Insertion Loss LC Connector
The tightly tolerance ceramic ferrules ensuring consistent low
8 Fiber Counts Used
1-plug x 1-row applications, 4 Fibers used in each end, requiring
lateral signal transposition.
Do you know the quality control procedure?
Step 1: Incoming quality control
Do inspect on all incoming materials. Inspection standard is AQL
0.65 Level II
Step 2: In-process quality control
Real time process control for defective products, control defective
Step 3: Outgoing quality Control
Adopt AQL 0.65 Level II Sampling plan to audit finished good
products to ensure quality level up to specification.
Step 4:Reliability Test
Inspect IL, Inspect RL, Changeability, ferrule end-face ,
vibration, tensile strength, low / high temperature cycling tests.